Tech Advice
Chemical Suggestion Guide:
Fluoropolymer Electric Immersion Heater Applications
- Acetic
- Acetane 70, 80
- Acid Etch
- Acid Pickle
- Actane Salt
- Acid Sulfate
- Alcorite
- Aluminum Anodizing
- Aluminum Bright Dip
- Aluminum Chloride
- Ammonium Persulfate
- Ammonium Bi Fluoride
- Anodizing
- ARP 28, 80 Blackening Salts
- Black Nickel
- Burrite
- Cadmium Black
- Cadmium Fluoborate
- Chlorine / Wet
- Chloride
- Chromium Anodizing
- Chromic Acetate
- Chromium Nickel
- Chromium (no fluorides)
- Chromium (fluoride)
- Cobalt Nickel
- Cobra Etch
- Copper Acid
- Copper Bright Acid
- Copper Fluoborate
- Copper Sulfate
- Diversity 511, 514
- Electroless Nickel
- Electroless Tin (Acid)
- Electropolishing
- Enthone 80 Acid
- Ferric Chloride
- Fluborate
- Gold Acid
- Grey Nickel
|
- Houghton AX-2010 Acid Etch
- Hydrogen Peroxide
- Hydrochloric Acid
- Hydrofluoric Acid
- Indium
- Indite (1, 2, 3, 4-C, 78, 15)
- Iron Fluborate
- Isoprep Acid Salts
- Magnesium Nitrate
- Muriatic Acid
- Nickel Plating Solutions (Watts)
- Nitric Acid
- McDermid 629
- Nitric Hydrochloric
- Oleic Acid
- Phosphoric Acid
- Potasium Acid Sulfate
- Potassium Hydrochloric
- Reliant Anodal Acid Etch
- Rhodium
- Ruthenium
- Salt (Actine)
- Sodium Hypchlorite
- Sodium Persulfate
- Stanostar
- Sulfimate Nickel
- Sulfuric Acid
- Sulfur Peroxide
- Sulphamic Acid
- Sulfur Peroxide
- Sulphamic Acid
- Tin Nickel
- Tin Plating Acid (Stanus/ Sulphate)
- Tin Plating Acid (Fluborate)
- Trioxide (Pickle)
- Unichrome
- Woods Nickel Strike
- Yellow Dichromate
- Zinc Acid
|
Do not use electric immersion heaters to heat flamable solutions.
This information is offered only as a guide. It is not intended to be
the sole guide for specification recommendations. HeatStar Systems assumes
no obligation or liability for any advice furnished.
Always contact your chemical supplier for complete advice.
Get more Tech Advice.
|
